|
Products
HTY TOC (TOTAL ORGANIC CARBON ) ANALYZER
Category: TOC Analyzer
HTY TOC (TOTAL ORGANIC CARBON ) ANALYZER HTY TOC Analyzer is a measuring and analytical instrument which has high performance, and it owns independent patent. Using double-wavelength ultraviolet nano catalytic oxidation method, the oxidation capacity has raising 100 times than using traditional oxidation method with single-wavelength ultraviolet, which avoiding the oxidizer contained gas or other dangerous impurities. It is manufactured according to the USP, EP and Ch.P 2005, it can be widely used to measure the organic carbon of pharmaceutical water, biochemical industry, pure water, ultrapure water, etc. Common features for HTY-DI1000 and HTY-2500 1. Using ultraviolet catalytic oxidation method: H2O+HV(185nm)—>·OH-+H+·Organic agent +·OH－>CO2+H2O+ other products. 2. It was independently developed and applies electric conductivity detector with micro-conductivity cell which electrode constant is 0.01, it can detect organism while the concentration is lower than 1μs/cm. 3. TFT true color liquid crystal display (320X234), most simplified operation. 4. Applying advanced electric technology, easy to operate and maintain: designed with RAM storage chip, this can statistic and analyze the sample data and also can output the data into PC. Also designed with alarm, control standard and RS-232 interaction interface. And it can be evaluated automatically. 5. Don’t need burning gas. 6. Creatively applying OPA2277 module technology 7. The high stability of control of accurate measurement comes true, which to ensure the data be transferred and enlarged stably and accurately. 8. Double-wavelength ultraviolet nano catalytic oxidation method 9. Tailin independently designed and developed ultra-pure quartz nano catalyze coat spiral pipe, especially for measuring the organism of low concentration in the pharmaceutical water. 10. Designed with buzzer alarm for upper limit, to protect the instrument and prevent human error. 11. Extension device is optional which is special for measuring in production line. ★ Application scope of DI1000 Deionization pure water, purified water in pharmaceutical industry, water for injection, pharmacy and biochemical, cleaner certification. Operational principle of DI1000 Using the ultraviolet (185nm-254nm) to irradiation the testing sample, to oxidize the organics in water to CO2 , measure the concentration of CO2 by conductometric after the CO2 get through the membrane, then get out the content of organic carbon. Using ultraviolet oxidation method 1, Need no acid reagents 2, No poisoning caused by catalyzer 3, Easy to maintenance 4, Need no gas bottle Using direct conductometric detection method 1, high sensitivity 2, high selectivity 3, high precision Features of DI1000 l Portable，Light, portable, and easy to move; l Measuring method，Using direct conductometric detection method; l Requirements for testing water，Deionization pure water (1ppb~1000ppb); l Low operating costs, easy to maintenance，Running without acid reagents and oxidants; l Easy to operate，Designed with four-key, to operate easily. DI1000 TECHNICAL PARAMETER Power supply：220V/50Hz Rated Power: 40W Measuring limit: 小于0.001mg/L Measuring precision: ±5% Measuring range: 0.001mg/L-1.0mg/L Analyses time: 4min Response time: below 15min Sample temperature: 0-95℃ ★ Application scope of HTY-2500 Pharmacy water, drinking water supplies, biochemical, environmental monitoring, cleaner certification… FEATURES: l Measuring method Using membrane conductometric detection method, which can avoid the effects caused by interfering ion such as C1-· SO42-·SO3- in the undeionized water. l Requirements for testing water Both deionized water and undeionized water（1ppb~2500ppb）. Operational principle of HTY-2500 The carbon is comprised of organic carbon and inorganic carbon. Firstly, measure the inorganic carbon’s concentration that is figured as IC, meanwhile fully oxidize the organics in the water, after the organic carbon change into inorganic carbon, then measure the concentration of inorganic carbon that is figured as TC, thus the difference of TC and IC is the total organic carbon(TOC)’s concentration i.e. TOC=TC-IC. HTY2500 TECHNICAL PARAMETER Power supply：AC220V/50Hz Rated Power: 100W Measuring limit: 小于0.001mg/L Measuring precision: ±5% Measuring range: 0.001mg/L-2.5mg/L Analyses time: 6min Response time: Between 30min Sample temperature: 0-95℃
Technical parameter of TOC analyzer
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
RSS